Research

Home / Research / Thesis
CATEGORY

Masters' Theses A Study of Decision Support for the implementation of Cellular Manufacturing Systems.

2015.07.29 12:33

ultra_admin 조회 수:247

year 2001 
author Muynghee Byun 
Keyword Cellular Manufacturing System, part family, cell formation, machine layout, moving distance 
Abstract It is one of the most important qualities that the company responds to customer demands rapidly. In order to this ability, the factories try to reduce the product lead-time and inventory levels. Sometimes, the factories make their attempts to change their system layouts. In most cases, it is common to change from job shop system to Cellular Manufacturing System (CMS).

Until now, the research of CMS was biased on the cell formation method. Most CMS papers were concerned about various methods for solution of cell formation. But it is true that these researches have not been used in reality. In fact, the factories want to know the impact of systems changes-expected advantage, cost etc. These factors are more important than the cell formation method.

This paper aims at following factors. The considered environment is factory to make one cell for particular part group. Through the procedure of cell implementation, this paper provides the expected advantages and costs with decision makers.

The procedure of cell formation and machine layout is operated connected with DataBase data. The considering factors are parts moving costs related one cell implementation, parts demands, routing, and moving distance based on machine distance. 
c MS 

Download :

이 게시물을
목록
목록
번호 c year 제목 author
85 MS  1994  A Study on Distributed Shop Floor Control of Flexible Manufacturing Systems [4] Daeyoung Chung 
84 MS  1994  A Study on Development of a Knowledge Based Scheduler and Knowledge Acquisition through Simulation [1] Kitae Kim 
83 MS  1995  A Study on knowledge Acquisition for Simulation-based Scheduling Expert System [1] Soohyun Lee 
82 MS  1995  A study on intelligent dispatching strategy in Automated Manufacturing Systems [5] Seongwoo Lee 
81 MS  1988  A Simulation Study on Operating Rules of FMS Considering Tool Change Byunghoon Yoo 
80 MS  1988  Development of a Classification and Coding System through Fuzzy Sets Approach [1] Namkyu Park 
79 MS  1988  A Study on The Machine-Part Group Formation for FMS Planning and Operation Jaeyoon Kim 
78 MS  1989  A Study on the Computer and Database Location of Distributed Computer Systems in FMS [1] Kilsup Yang 
77 MS  1989  An FMS Planning Algorithm Considering Tool Magazine Capacity and Alternative Routings [6] Chankwon Park 
76 MS  1989  A Mathematical Decision Making Model for Real-Time Scheduling of an FMS Jonghan Kim 
75 MS  1995  An Object-Oriented Framework for the Implementation of Distributed Shop Floor Control in FMS [2] Kyungsuk Lee 
74 MS  1995  A study on Real-Time Collection of Shop Floor Data Using Speech Recognition [2] Namjoo Kim 
73 MS  1995  A Study on the Group Scheduling Problem with Sequence-dependent Set-up Times in a Multi-stage Cellular Manufacturing Systems Jaesoo Shim 
72 MS  1990  A Fuzzy Linguistic Approach to the Part Selection Problem in FMS [1] Yoosuk Hong 
71 MS  1990  A Study on Data Allocation Problems for Distributed Database Design [2] Kitae Shin 
70 MS  1991  A Study on Scheduling Problem of Hierarchically Structured Products in FMS [1] Hanil Jeong 
69 MS  1991  A Study on Performance Evaluation of Production Plan for FMS Using Queueing Network [1] Sangbok Woo 
68 MS  1991  A Study on the Layered Architecture for the Control of FMS Cells Hosub Shin 
67 MS  1991  A Study on Image Processing and CAD - Vision System Interface of Manufactured Parts [1] Kidong Kim 
66 MS  1992  A Study on Production Planning Problems in a Flexible Machining and Assembly System [1] Sukang Lee 
65 MS  1992  Event-Driven On-Line Operational Control of Flexible Manufacturing Systems Jonghun Park 
64 MS  1992  A Decision Support System for A Machine Specifications in Design of An FMS [6] Youngkwan Ko 
63 MS  1993  A Study on the Computer-Aided Process Planning for Rotational Parts Considering Machine Status [1] Sungbum Chun 
62 MS  1993  A Comparative Analysis of Production Control Policies under Production Uncertainty [5] Janghan Lee 
61 MS  1993  A Study on Effects of Order Release Policies to Performance of Manufacturing Systems Choonghwan Ahn 
60 MS  1993  A Study on the FMS Shop Floor Control by Bidding among Autonomous Objects Jangsuk Moon 
59 MS  1993  A Supervisory Control Approach to Rapid Implementation of Low-Level Control Software for FMC [1] Sangkyun Kim 
58 MS  1994  A Finitely Recursive Processes Approach to Modeling and Control of an FMC Jaeheuk Choi 
57 MS  1996  A Study on the Generation and DB Construction of Modular BOM [1] Yonggu Ji 
56 MS  1997  A Scheduling Algorithm Considering Subcontractor and Machine Setup Cost in MRP Environment [1] Kichang Lee 
55 MS  1997  A Study on FMS Scheduling Problems Based on Priority Functions Generated by Genetic Programming ChangUk Kim 
54 MS  1997  A New Approach to Master Production Scheduling in the MRP environment [1] Sangdo Choi 
53 MS  1998  A study on an efficient real-time deadlock-free control algorithm by using graph-theoretic approach [27] Jungwoon Yoo 
52 MS  1998  A Study on UML representation of CIM-OSA and availability of analysis and design pattern in CIM-OSA [1] Seungoh Han 
51 MS  1998  Design of Integrated BOM Management System supporting Multiple Views Keumseok Kang 
50 MS  1999  An Evaluation of Workload Limited Order Release Strategies considering Planning Stage in a Jop Shop Byeongdae Choi 
49 MS  1999  A Study on the Development of Event-driven MRP Components Considering Capacity Constraints [1] Seunghyun Yoon 
48 MS  1999  A Study on the Implementation of the Speech Recognition System for the Real-Time Decision Support of Manufacturing Cells [18] Eoksu Sim 
47 MS  2000  A Study on Work Measurement Using Image Processing [8] . 
46 MS  2000  Design of a Hybrid System in Integrating Kanban with MRP [2] Taeyoung Song 
45 MS  2000  Job Shop Scheduling for Minimizing the Sum of Earliness and Tardiness Dongsu Park 
44 MS  2000  A Study on Integrated Production Planning of Distributed Manufacturing Systems on Supply Chain Dosung Go 
» MS  2001  A Study of Decision Support for the implementation of Cellular Manufacturing Systems. [1] Muynghee Byun 
42 MS  2001  A Study on Components Development for Production Management Daiki Min 
41 MS  2002  Design and Implementation of Model Management System for Supply Chain Planning [1] Youngcheol Yang 
40 MS  2002  A combined DEA and BSC methodology for evaluating organization efficiency [1] Bumsoo Kim 
39 MS  2003  Design of a BOF Blowing Control Model Using Artificail Intelligence Jungjoon Park 
38 MS  2003  Production Planning and Distribution Planning using Demand based mixed Genetic Algorithm in a Supply Chain Jung Im 
37 MS  2004  A Study on Extended Workflow Model Considering Activity Based Costing [27] Moontae Hwang 
36 MS  2004  A Study on Reverse Supply Chain of End of Life Vehicle for the Enhanced Recycle Performance [6] Miyeon Ryu 
쓰기
태그
Address

39-317, Dept. of Industrial Engineering,

Seoul National University, Shillim-dong, Gwanak-gu,

Seoul, 151-744 Korea

Contacts

+82-2-880-7182

Designed by MAILAB. All Rights Reserved.